Bend Allowance & Flat Length Calculator
Work out the flat blank length of a bent sheet metal part from its flange lengths, thickness, bend radius and angle.
Results are estimates for planning. Confirm material properties with your supplier and final tool design with your toolmaker.
The formulas
When sheet metal bends, the outside stretches and the inside compresses. Somewhere in between is the neutral axis, which keeps its length. The K-factor says where it sits: the fraction of the thickness from the inside surface.
- Bend allowance: BA = π/180 × angle × (R + K × t)
- Outside setback: OSSB = tan(angle / 2) × (R + t)
- Bend deduction: BD = 2 × OSSB − BA
- Flat length (flanges measured to the outside): L1 + L2 − BD
Bend allowance vs bend deduction
Bend allowance is the length of material in the bend itself, measured along the neutral axis. You add it to the flat lengths of the straight sections. Bend deduction is what you subtract from the sum of the outside flange lengths to get the flat blank. They describe the same bend from two directions. Use whichever matches how your drawing is dimensioned.
Bend allowance chart (90° bends)
Quick reference for 90° bends with inside radius equal to thickness and K = 0.33:
| Thickness t (mm) | Inside radius R (mm) | Bend allowance (mm) | Bend deduction (mm) |
|---|---|---|---|
| 0.5 | 0.5 | 1.04 | 0.96 |
| 0.8 | 0.8 | 1.67 | 1.53 |
| 1.0 | 1.0 | 2.09 | 1.91 |
| 1.2 | 1.2 | 2.51 | 2.29 |
| 1.5 | 1.5 | 3.13 | 2.87 |
| 2.0 | 2.0 | 4.18 | 3.82 |
| 2.5 | 2.5 | 5.22 | 4.78 |
| 3.0 | 3.0 | 6.27 | 5.73 |
Choosing the K-factor
K depends on material, thickness, radius and the bending method. As a starting point, about 0.33 suits tight bends (radius close to the thickness) in mild steel, rising towards 0.5 as the radius gets larger. For production tools, the K-factor is confirmed by bending test pieces and measuring them. That is part of the trial stage before a progressive tool is approved.
Design tips for bends
- Keep the inside radius at least equal to the thickness for mild steel; harder materials need more.
- Keep holes away from bend lines, or they stretch into ovals.
- Bend across the rolling direction where possible to avoid cracking.
See the full sheet metal design guidelines for stamping and how bends are planned in a progressive die strip layout.
Need the part made? Send us your drawing for a technical review and quotation within 24 hours.
