Punch & Die Clearance Calculator

Get the cutting clearance in mm and the punch and die sizes for a blanking or piercing operation.

Diameter or width of the feature.

Clearance per side–
Total clearance–
Punch size–
Die opening–

Results are estimates for planning. Confirm material properties with your supplier and final tool design with your toolmaker.

How it works

  • Clearance per side = clearance % × thickness
  • Total clearance = 2 × clearance per side
  • Piercing: punch = hole size; die opening = hole size + total clearance
  • Blanking: die opening = part size; punch = part size − total clearance

The size you keep (the hole when piercing, the blank when blanking) sets which side is made to drawing size. Get this the wrong way round and every part comes out undersize, or every hole oversize.

Typical clearance by material

MaterialTypical clearance per side
Soft aluminium4 – 6% of thickness
Copper and brass4 – 6%
Mild steel / CRCA5 – 8%
Stainless steel7 – 10%
High-strength steel8 – 12%

The calculator's defaults sit in the middle of these ranges. Tighter clearance gives a cleaner edge and smaller burr but wears the tool faster; looser clearance extends tool life but increases rollover and burr. Read the full punch and die clearance guide and how clearance affects burr height.

Also try the press tonnage calculator for the same part. Need the tool built? Our progressive tools and press tools are cut on in-house CNC wire cut EDM for even clearance all round. Send us your drawing.

Let's get started

Send Us Your Drawings

Get a technical evaluation and commercial quote within 24 hours.