Sheet Metal Gauge to mm Chart (SWG Thickness Table)
In Indian workshops, sheet thickness is still often spoken of in "gauge": 16 gauge, 18 gauge, 20 gauge. Drawings and material orders, though, should always use millimetres. Here is the conversion for the Standard Wire Gauge (SWG) used in India and the UK, and why specifying gauge alone can cause expensive mistakes.
Sheet metal gauge to mm chart (SWG)
| SWG | Thickness (mm) | Thickness (inch) |
|---|---|---|
| 8 | 4.064 | 0.160 |
| 9 | 3.658 | 0.144 |
| 10 | 3.251 | 0.128 |
| 11 | 2.946 | 0.116 |
| 12 | 2.642 | 0.104 |
| 13 | 2.337 | 0.092 |
| 14 | 2.032 | 0.080 |
| 15 | 1.829 | 0.072 |
| 16 | 1.626 | 0.064 |
| 17 | 1.422 | 0.056 |
| 18 | 1.219 | 0.048 |
| 19 | 1.016 | 0.040 |
| 20 | 0.914 | 0.036 |
| 21 | 0.813 | 0.032 |
| 22 | 0.711 | 0.028 |
| 23 | 0.610 | 0.024 |
| 24 | 0.559 | 0.022 |
| 25 | 0.508 | 0.020 |
| 26 | 0.457 | 0.018 |
| 27 | 0.417 | 0.0164 |
| 28 | 0.376 | 0.0148 |
| 29 | 0.345 | 0.0136 |
| 30 | 0.315 | 0.0124 |
The higher the gauge number, the thinner the sheet.
Why "gauge" causes confusion
- Different gauge systems exist. SWG (British Standard Wire Gauge), BWG and the US Manufacturers' Standard Gauge give different thicknesses for the same number. 16 gauge in the US standard for steel is about 1.52 mm, while 16 SWG is 1.626 mm.
- Mills sell sheet in millimetres. "18 gauge" usually turns into 1.2 mm when ordered, which is close to 18 SWG (1.219 mm) but not the same as the US 18 gauge.
- Tooling depends on exact thickness. Punch-to-die clearance, bend allowance and press force are all calculated from thickness, so a 0.1 mm mismatch can affect burr height and bend angles.
What to put on your drawing
- Thickness in mm, for example 1.2 mm, not "18 gauge".
- Material grade, for example CRCA or SS 304 (see our sheet metal material guide).
- Thickness tolerance, if it is critical to the part.
Common sheet thicknesses for stamped parts
Steel sheet for stamping is commonly available in thicknesses such as 0.5, 0.6, 0.8, 1.0, 1.2, 1.5, 1.6, 2.0, 2.5 and 3.0 mm. Designing to a standard thickness shortens material lead times and lowers cost. It is one of our 5 ways to reduce sheet metal cost.
Working out press force or flat lengths? Try our free press tonnage calculator and bend allowance calculator.
We make progressive tools and stamped sheet metal parts across this thickness range. Send us your drawing for a quote within 24 hours.
